Datacom and Telecom Industry
In ICT & Telecom, swift identification and recovery of both wires and components is important to get applications back online fast, and avoid upsetting customers
Get the guide
Swift identification to minimise downtime
In the Datacom & Telecom industry speed and recovery are crucial during incidents. Swift identification and recovery of both wires and components is important to get applications back online fast, and avoid upsetting thousands of customers. Brady offers easy-to-apply solutions, with maximum durability and readability for all identification challenges the industry faces. An ever-evolving industry needs ever-evolving suppliers. Brady is always researching new materials and products to offer durable identification solutions, even in the harshest of environments. Brady identification products are researched and tested to make sure they comply with industry standards.
Most widely used wire and cable markers for a reason
Brady offers a full range of wire & cable labelling solutions. Brady’s self-laminating labels are the most popular wire identification solution in ICT & Telecom, especially used with copper cables, the typical CAT6 or CAT7 solutions. Brady offers specific labels that, when removed, don’t damage a fibre-optic cable. What’s more, Brady fibre-optic cable labels only slightly touch the fibre-optic and never interfere with its data transfer capacity.
Self-laminating labels protect their printing with a water and UV resistant overlaminate, making them suitable for use both outdoors and underground. Our sleeves can be repositioned when applied. Once heated, they are also insulating. The Brady Tag range offers many options including overlaminates and the ability to withstand harsh environments for many years. For panelbuilders, Durasleeves are the preferred solution, allowing identification of cables before or after they are attached.
- Wrap around Labels
- Wire and Cable Sleeves
- Wire and Cable Tags
- Durasleeve Inserts and Carriers
- Label Printers and Software
Untouched by heat
To identify wires and components in extreme heat or general harsh conditions, a Brady specialized label is needed. Several durable and resistant labels in the Brady offer are guaranteed to resist wide range temperatures and all types of solvents.
Select the durable material you need and print it with a dedicated ribbon to guarantee readable labels even when touched by all types of solvents.
- Metalised Polyester Labels
- White Polyester Labels
- EPREP - Engraved Plate Replacement Labels
- High Performance Low Shrink Vinyl
- Permashield Labels
- Label printers and Software
Outlet Identification shows a high level of professionalism
A clearly identified outlet shows a high level of professionalism. Pre-cut labels can be used to mark outlets. A continuous strip is a good solution when many different types of outlets have to be identified. To further facilitate outlet identification, Brady presents a series of portable label printers with built-in cutters. Brady has a wide selection of tags to identify outlets.
Depending on the conditions your outlet operates in, Brady offers different materials to guarantee tag readability even when in contact with solvents, cleaning solutions or wide temperature ranges.
Never detach the wrong cable again
When scanning a rack, every connection should be clearly marked. Regardless of the brand of patch panel or the type of connector (RJ45, fibre, etc.) a clearly marked connection point will help saving time by making sure the wrong cable isn’t detached. To neatly mark your patch panels, Brady software contains an exhaustive list of patch panels for swift and easy marking.
Brady has a wide selection of cable tags to identify all connections on your Patch panel. Depending on the conditions your patch panel operates in, Brady offers different materials to guarantee tag readability even when in contact with solvents, cleaning solutions or wide temperature ranges.
Standards, Requirements and Specifications
Brady is committed to deliver identification solutions up to and beyond all industry standards. Brady is always pushing forward to adhere to the latest and most advanced industry standards. In Datacom the TIA/EIA 606 became a universally recognised standard. Brady uses TIA/EIA 606 as a reference for developing new identification products in ICT & Telecom. For a complete list of standards, or for specific requirements, please contact us.
We are always ready to add your requirements to our extensive laboratory test plan.
Brady offers specific Identification Products in compliance with:
- ANSI TIA/EIA 606 – a standard towards Datacom on labelling, documentation & testing
- RoHS compliant – Restriction of Hazardous Substances
- Lead, Mercury, Chromium, Cadmium, Brominated flame retardants
- UL recognised
- UL696 (Underwriters Laboratories): marking & labelling is approved towards this US test method
- CSA accepted (Canadian Standard Association): marking & printing is approved towards this Canadian test method
- DIN VDE 0472 Part 815 requirements: method to determine Halogen content
Identify any Cable & Component
Ever lost time figuring out where each wire goes?
Download this guide!
Get the guide